Run 1b5acb20
- Date
- Build
- 0.6.0-preDiffers from the v0.6.0 release only in comments, mock-only code and the version stamp.
- Used in the results page
- No
- Geode source
- de79ff4b26f0d707d273c76e3273fd55208d76f8
Load, save and release
Live Roblox serversEach run loads five fresh profiles, saves each, releases each after a change, loads them again and releases them again, with the steps on one key at least 8 seconds apart. Times are seconds from calling the library until its DataStore request finished.
Load, new profile
Median (the upright tick) and min to max of every sample (the bar). Medians less than one timing step (16.7 ms (1/60 s)) apart are ties.
Table: Time
| Subject | Median | Min | Max | n | Failed | Tie with |
|---|---|---|---|---|---|---|
| Geode | 249 ms | 182 ms | 333 ms | 5 | 0 | – |
| Geode, mailbox = true | 266 ms | 216 ms | 350 ms | 5 | 0 | – |
| ProfileStore | 299 ms | 250 ms | 333 ms | 5 | 0 | ProfileService |
| ProfileService | 283 ms | 249 ms | 332 ms | 5 | 0 | ProfileStore |
| DataStore2, Standard saving | 66 ms | 66 ms | 66 ms | 5 | 0 | – |
Requests per sample, by method. A range means the count varied between samples. 2 methods used.
| Subject | UpdateAsync | GetAsync | n | Counts |
|---|---|---|---|---|
| Geode | 1 | – | 5 | Same in every sample |
| Geode, mailbox = true | 1 | 1 | 5 | Same in every sample |
| ProfileStore | 1 | – | 5 | Same in every sample |
| ProfileService | 1 | – | 5 | Same in every sample |
| DataStore2, Standard saving | – | 1 | 5 | Same in every sample |
Load, stored profile
Median (the upright tick) and min to max of every sample (the bar). Medians less than one timing step (16.7 ms (1/60 s)) apart are ties.
Table: Time
| Subject | Median | Min | Max | n | Failed | Tie with |
|---|---|---|---|---|---|---|
| Geode | 200 ms | 183 ms | 233 ms | 5 | 0 | – |
| Geode, mailbox = true | 233 ms | 200 ms | 266 ms | 5 | 0 | – |
| ProfileStore | 252 ms | 230 ms | 266 ms | 5 | 0 | ProfileService |
| ProfileService | 250 ms | 199 ms | 316 ms | 5 | 0 | ProfileStore |
| DataStore2, Standard saving | 16 ms | 16 ms | 16 ms | 5 | 0 | – |
Requests per sample, by method. A range means the count varied between samples. 2 methods used.
| Subject | UpdateAsync | GetAsync | n | Counts |
|---|---|---|---|---|
| Geode | 1 | – | 5 | Same in every sample |
| Geode, mailbox = true | 1 | 1 | 5 | Same in every sample |
| ProfileStore | 1 | – | 5 | Same in every sample |
| ProfileService | 1 | – | 5 | Same in every sample |
| DataStore2, Standard saving | – | 1 | 5 | Same in every sample |
Save
Median (the upright tick) and min to max of every sample (the bar). Medians less than one timing step (16.7 ms (1/60 s)) apart are ties.
Table: Time
| Subject | Median | Min | Max | n | Failed | Tie with |
|---|---|---|---|---|---|---|
| Geode | 183 ms | 149 ms | 233 ms | 5 | 0 | – |
| Geode, mailbox = true | 200 ms | 166 ms | 217 ms | 5 | 0 | ProfileStore, ProfileService |
| ProfileStore | 201 ms | 200 ms | 263 ms | 5 | 0 | Geode, mailbox = true, ProfileService |
| ProfileService | 216 ms | 199 ms | 283 ms | 5 | 0 | Geode, mailbox = true, ProfileStore |
| DataStore2, Standard saving | 248 ms | 216 ms | 299 ms | 5 | 0 | – |
Requests per sample, by method. A range means the count varied between samples. 1 method used.
| Subject | UpdateAsync | n | Counts |
|---|---|---|---|
| Geode | 1 | 5 | Same in every sample |
| Geode, mailbox = true | 1 | 5 | Same in every sample |
| ProfileStore | 1 | 5 | Same in every sample |
| ProfileService | 1 | 5 | Same in every sample |
| DataStore2, Standard saving | 1 | 5 | Same in every sample |
Release
Median (the upright tick) and min to max of every sample (the bar). Medians less than one timing step (16.7 ms (1/60 s)) apart are ties.
Table: Time
| Subject | Median | Min | Max | n | Failed | Tie with |
|---|---|---|---|---|---|---|
| Geode | 216 ms | 199 ms | 266 ms | 5 | 0 | DataStore2, Standard saving |
| Geode, mailbox = true | 250 ms | 183 ms | 265 ms | 5 | 0 | ProfileStore, ProfileService |
| ProfileStore | 250 ms | 216 ms | 283 ms | 5 | 0 | Geode, mailbox = true, ProfileService |
| ProfileService | 251 ms | 233 ms | 316 ms | 5 | 0 | Geode, mailbox = true, ProfileStore |
| DataStore2, Standard saving | 200 ms | 183 ms | 250 ms | 5 | 0 | Geode |
Requests per sample, by method. A range means the count varied between samples. 1 method used.
| Subject | UpdateAsync | n | Counts |
|---|---|---|---|
| Geode | 1 | 5 | Same in every sample |
| Geode, mailbox = true | 1 | 5 | Same in every sample |
| ProfileStore | 1 | 5 | Same in every sample |
| ProfileService | 1 | 5 | Same in every sample |
| DataStore2, Standard saving | 1 | 5 | Same in every sample |
Server hops
Live Roblox serversTwo Luau Execution tasks at once play the old and the new server. The old server loads a profile, saves 777, waits 8 seconds, then changes it to 888 (999 when it keeps the profile) without saving. Times are seconds from the new server's load call until it has the data.
Old server releases
The old server releases when the new one starts loading, the way a server releases when a player leaves for another one.
| Subject | Saw the final save |
|---|---|
| Geode | 3 of 3 |
| Geode, mailbox = true | 3 of 3 |
| ProfileStore | 3 of 3 |
| ProfileService | 3 of 3 |
| DataStore2, Standard saving | 0 of 3 |
Median (the upright tick) and min to max of every sample (the bar). Medians less than one timing step (16.7 ms (1/60 s)) apart are ties.
Table: Time
| Subject | Median | Min | Max | n | Failed | Tie with |
|---|---|---|---|---|---|---|
| Geode | 0.62 s | 0.62 s | 0.67 s | 3 | 0 | – |
| Geode, mailbox = true | 0.58 s | 0.50 s | 0.70 s | 3 | 0 | – |
| ProfileStore | 5.47 s | 5.43 s | 5.52 s | 3 | 0 | – |
| ProfileService | 7.25 s | 7.23 s | 7.28 s | 3 | 0 | – |
| DataStore2, Standard saving | 0.03 s | 0.03 s | 0.05 s | 3 | 0 | – |
Requests per sample, by method. A range means the count varied between samples. 3 methods used.
| Subject | UpdateAsync | GetAsync | GetAsync past the cache | n | Counts |
|---|---|---|---|---|---|
| Geode | 2 | – | 1 | 3 | Same in every sample |
| Geode, mailbox = true | 2 | 2 | 1 | 3 | Same in every sample |
| ProfileStore | 2 | – | – | 3 | Same in every sample |
| ProfileService | 2 | – | – | 3 | Same in every sample |
| DataStore2, Standard saving | – | 1 | – | 3 | Same in every sample |
Old server keeps it
The old server never releases on its own. 999 means the library got it to hand the profile over with its last change, 777 means the new server went ahead without it.
| Subject | Value seen |
|---|---|
| Geode | 999 in 1 of 1 |
| Geode, mailbox = true | 999 in 1 of 1 |
| ProfileStore | 999 in 1 of 1 |
| ProfileService | 999 in 1 of 1 |
| DataStore2, Standard saving | 777 in 1 of 1 |
Median (the upright tick) and min to max of every sample (the bar). Medians less than one timing step (16.7 ms (1/60 s)) apart are ties.
Table: Time
| Subject | Median | Min | Max | n | Failed | Tie with |
|---|---|---|---|---|---|---|
| Geode | 0.63 s | 0.63 s | 0.63 s | 1 | 0 | – |
| Geode, mailbox = true | 0.58 s | 0.58 s | 0.58 s | 1 | 0 | – |
| ProfileStore | 5.38 s | 5.38 s | 5.38 s | 1 | 0 | – |
| ProfileService | 21.32 s | 21.32 s | 21.32 s | 1 | 0 | – |
| DataStore2, Standard saving | 0.03 s | 0.03 s | 0.03 s | 1 | 0 | – |
Requests per sample, by method. A range means the count varied between samples. 3 methods used.
| Subject | UpdateAsync | GetAsync | GetAsync past the cache | n | Counts |
|---|---|---|---|---|---|
| Geode | 2 | – | 1 | 1 | Same in every sample |
| Geode, mailbox = true | 2 | 2 | 1 | 1 | Same in every sample |
| ProfileStore | 2 | – | – | 1 | Same in every sample |
| ProfileService | 4 | – | – | 1 | Same in every sample |
| DataStore2, Standard saving | – | 1 | – | 1 | Same in every sample |
Throttling
Live Roblox serversA burst of 160 or 161 UpdateAsync calls on throwaway keys uses up the server's request budget, then the library loads, saves and releases one profile back to back. One sample per run.
Load
Shown as a range only: the shortest and longest sample, no median.
Table: Time
| Subject | Min | Max | n | Failed |
|---|---|---|---|---|
| Geode | 32.71 s | 32.71 s | 1 | 0 |
| Geode, mailbox = true | 33.69 s | 33.69 s | 1 | 0 |
| ProfileStore | 31.17 s | 31.17 s | 1 | 0 |
| ProfileService | 31.22 s | 31.22 s | 1 | 0 |
| DataStore2, Standard saving | 31.04 s | 31.04 s | 1 | 0 |
Requests per sample, by method. A range means the count varied between samples. 2 methods used.
| Subject | UpdateAsync | GetAsync | n | Counts |
|---|---|---|---|---|
| Geode | 1 | – | 1 | Same in every sample |
| Geode, mailbox = true | 1 | 1 | 1 | Same in every sample |
| ProfileStore | 2 | – | 1 | Same in every sample |
| ProfileService | 1 | – | 1 | Same in every sample |
| DataStore2, Standard saving | – | 61 | 1 | Same in every sample |
Save
Shown as a range only: the shortest and longest sample, no median.
Table: Time
| Subject | Min | Max | n | Failed |
|---|---|---|---|---|
| Geode | 1.17 s | 1.17 s | 1 | 0 |
| Geode, mailbox = true | 1.20 s | 1.20 s | 1 | 0 |
| ProfileStore | 0.17 s | 0.17 s | 1 | 0 |
| ProfileService | 0.13 s | 0.13 s | 1 | 0 |
| DataStore2, Standard saving | 1.12 s | 1.12 s | 1 | 0 |
Requests per sample, by method. A range means the count varied between samples. 1 method used.
| Subject | UpdateAsync | n | Counts |
|---|---|---|---|
| Geode | 1 | 1 | Same in every sample |
| Geode, mailbox = true | 1 | 1 | Same in every sample |
| ProfileStore | 1 | 1 | Same in every sample |
| ProfileService | 1 | 1 | Same in every sample |
| DataStore2, Standard saving | 1 | 1 | Same in every sample |
Release
Shown as a range only: the shortest and longest sample, no median.
Table: Time
| Subject | Min | Max | n | Failed |
|---|---|---|---|---|
| Geode | 0.18 s | 0.18 s | 1 | 0 |
| Geode, mailbox = true | 0.17 s | 0.17 s | 1 | 0 |
| ProfileStore | 0.15 s | 0.15 s | 1 | 0 |
| ProfileService | 7.08 s | 7.08 s | 1 | 0 |
| DataStore2, Standard saving | 0.10 s | 0.10 s | 1 | 0 |
Requests per sample, by method. A range means the count varied between samples. 1 method used.
| Subject | UpdateAsync | n | Counts |
|---|---|---|---|
| Geode | 1 | 1 | Same in every sample |
| Geode, mailbox = true | 1 | 1 | Same in every sample |
| ProfileStore | 1 | 1 | Same in every sample |
| ProfileService | 1 | 1 | Same in every sample |
| DataStore2, Standard saving | 1 | 1 | Same in every sample |
Libraries
| Library | Version | Commit | Licence |
|---|---|---|---|
| ProfileStore | no releases, latest commit on main (2025-07-31) | MadStudioRoblox/ProfileStore@45c9847 | Apache-2.0 |
| ProfileService | no releases, latest commit on master (2024-10-13) | MadStudioRoblox/ProfileService@d736800 | Apache-2.0 |
| Lapis | v0.3.3 | nezuo/lapis@f140aca | MIT |
| Promise | v4.0.0, the version Lapis 0.3.3 asks for | evaera/roblox-lua-promise@2c6f433 | MIT |
| DataStore2 | ds2-1.4.0 | Kampfkarren/Roblox@ab81664 | custom: copying and changing allowed, changes to a published game's copy must be shared |
Couldn't run
- Lapis, Load, save and release
- RunService.PostSimulation didn't fire in this task, and Lapis sends its DataStore requests from that event
- Lapis, Server hops
- RunService.PostSimulation didn't fire in this task, and Lapis sends its DataStore requests from that event
- Lapis, Throttling
- RunService.PostSimulation didn't fire in this task, and Lapis sends its DataStore requests from that event
